Product
ProductCurrent position > Product detail

Orifice flowmeter specifications

『Orifice flowmeter specifications』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. Scope of Application of Orifice Plate Flow Meter

1. nominal diameter: 15 mm ≤ DN ≤ 1200mm 2. nominal pressure: PN ≤ 40MPa 3. working temperature: -50 ℃, slow speed ≤ t ≤ noise and collision 550 ℃ 4. range ratio: 1:10, 1:155 Accuracy: Level 0.5, Level 1

2. What are the installation dimensions of the DN80 flange for orifice flow meters?

Flange outer diameter: 200mm, flange center distance: 160mm, bolt diameter: 18mm, number of bolt holes: 8. Orifice flowmeter is a type of flow meter with a diameter.

3.6、 12. What are the bottom area, height, and volume of the 24 and 96 well plates? Add volume when using in general ..

6-well plate bottom area 9.6cm; culture medium 2.5ml; 12 well plate bottom area 4.5cm; culture medium 2ml; 24 well plate bottom area 2cm; culture medium 1ml; 96 well plate bottom area 0.32cm; culture or cover culture medium 0.1ml. Orifice plate flowmeter, also known as differential pressure flowmeter, is composed of a primary detection element (throttling element) and a secondary device (differential pressure transmitter and flow display instrument), widely used for flow measurement of gases, vapors, and liquids. It has the characteristics of simple structure, easy disassembly and maintenance, stable performance, and reliable use. Additional information: Orifice plate is a differential pressure generating device for measuring flow rate, which can be used in conjunction with various differential pressure gauges or transmitters to measure the flow rate of various fluids in pipelines. The throttling device includes annular orifice plates, nozzles, etc. The throttling device is used in conjunction with differential pressure transmitters to measure the flow rates of liqui

Orifice flowmeter specifications
ds, vapors, and gases. It is widely used in industries such as petroleum, chemical, metallurgy, power, and light industry. When the fluid filled in the pipeline flows through the throttling device inside the pipeline, the flow beam will form a local contraction at the throttling element of the throttling device, thereby increasing the flow velocity and reducing the static pressure. As a result, a pressure drop, or pressure difference, is generated before and after the throttling element. The larger the flow rate of the medium, the greater the pressure difference generated before and after the throttling element. Therefore, the size of the fluid flow can be measured by measuring the pressure difference. This measurement method is based on the laws of energy conservation and flow continuity. Reference source: Baidu Baike - Orifice Plate

How to convert the reading of this flowmeter to 4.052

It is not possible to directly convert the reading of the flowmeter through "052". The specific reference of "052" needs to be clarified first, and then the corresponding conversion logic needs to be matched.

1. The most common reference and conversion method for "052" 1 Reference: The aperture ratio of the differential pressure orifice flowmeter is β=0.52, which is one of the most commonly used orifice parameters on industrial pipelines. The conversion should follow the national metrological verification regulation JJG 640. The core parameters and formulas are as follows: - First, determine the orifice diameter d=0.52 × pipeline inner diameter D, and calculate the opening area A ₂=π * (d/2) ²; -According to the standard outflow coefficient table, when β=0.52, the outflow coefficient α is approximately 0.605~0.615 (v

『SILVER Official Website SERVICE』

Copyright2026SILVER E-Commerce
[email protected]
+86 15365082610