Current position > News detail
『Mixed bed flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
1. Project situation of Khorgos Nangang Thermal Power Co., Ltd.
The projects involved by Khorgos Nangang Thermal Power Co., Ltd. mainly include heat supply unit reconstruction project and bidding procurement project. Heat supply unit reconstruction project name: Heat supply unit reconstruction project of Khorgos Nangang Thermal Power Co., Ltd. Construction site: the new unit is located in the existing turbine plant of Khorgos Nangang Thermal Power Co., Ltd. Construction content: Demolition of the existing 2 # steam turbine generator unit (50MW condensing steam turbine generator unit), installation of a new 30MW back pressure steam turbine generator unit at its location, and construction of supporting auxiliary equipment such as containerized oil station and steam seal heater, as well as related pipeline construction within the scope of the new unit body. At the same time, a new boiler feedwater treatment plant will be built, using a reinforced concrete frame structure and equipped with a boiler feedwater treatment system with a processing capacity of 2 × 150t/h. The treatment process includes filtration, reverse osmosis, and mixed bed. Total investment: The total investment of this project is 39.2238 million yuan, and all funds are self raised by the construction unit. Construction period: The project is planned to start construction in April 2021, and Xianliang will be put into operation in September 2021, with a construction period of 6 months. The bidding procurement project Khorgos Nangang Thermal Power Co., Ltd. also involves several bidding procurement projects, which cover multiple categories such as valves, return air cowls, long diameter nozzle flow meters, electric valves, balance flow meters and ori
2. Overview of condensate polishing
1) Its main function is to remove salt substances (i.e. various anions and cations) from water, as well as impurities such as suspended solids and colloids leaked from the pre filter.
. 2) Our companys high-speed mixed bed adopts a spherical mixed bed with a diameter of 3000mm, and the inlet water distribution device is a three-stage water distribution system. Not only does it fully ensure uniform distribution of water inflow, but it also prevents water flow from directly flushing the resin surface, causing surface unevenness and resulting in bias flow, reducing the periodic water production and effluent quality of the mixed bed. Water enters the bed from the upper part of the mixed bed, passes through the resin, and flows out from the lower outlet device. The water outlet device is designed as a butterfly shaped plate with 176 water caps. The entire water outlet device is made of 316 and has two functions: firstly, due to the uniform distribution of water caps inside the equipment, water can flow evenly through the resin layer, making full use of each part of the resin and maximizing the water production capacity; Secondly, the smooth curved stainless steel porous plate can reduce the ad