Shaanxi Quality Flow Meter Model | What are the specifications and models of the flow meter?

『Shaanxi Quality Flow Meter Model』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

The flow range of the E+H mass flowmeter varies significantly depending on the model, ranging from a very small 0-10 kg/h to a very large 0-220000 kg/h. 1. Specific models and flow ranges are based on publicly available information. For the flow ranges of some common models, please refer to the following table by Brother Yuliang: | Model Series | Flow Range (kg/h) | Flow Range (lb/min) | | ----------------------------------------- | 8E5B50 and 80F Models | 0-22200000 | 0-80840 | 40E Series Width | 0-180000 | 0-6600 | | Other Models | 0-100000 | - | 2 The core consideration for selection is that the specific model is the primary factor determining the flow range. Different series of products are designed for specific working conditions and measurement requirements. Therefore, it is crucial to clarify your application scenario and the accurate amount of virtual meditation required.

2. What is FIQ flow meter

1. FIQ stands for flow indicator with cumulative quantity.

2、 The measurement principle of a flowmeter is Faradays law of electromagnetic induction. The main components of the sensor are the measuring tube, electrode, excitation coil, iron core, and magnetic yoke housing. It is mainly used to measure the volumetric flow rate of conductive liquids and slurries in closed pipelines. Including strong corrosive liquids such as acid, alkali, and cherry blossom salt. This product is widely used in industries such as petroleum, chemical, metallurgical, textile, food, pharmaceuticals, papermaking, as well as environmental protection, municipal management, and water conservancy construction.

3. What are the specifications and models of the flowmeter?

There are several models available: SG-NZ-KD

1, EXQ41W, ZXLDG, ZXGY.. A flowmeter is an instrument that indicates the measured flow rate and/or the total amount of fluid within a selected time interval. Simply put, it is an instrument used to measure fluid flow in pipelines or open channels. Flow meters are divided into differential pressure flow meters, rotor flow meters, throttling flow meters, narrow slit flow meters, volumetric flow meters, electromagnetic flow meters, ultrasonic flow meters, etc. Classified by medium: liquid flowmeter and gas flowmeter. Flow meter selection: Five aspects can be considered, including flow meter instrument performance, fluid characteristics, installation conditions, environmental conditions, and economic factors. The detailed factors in five aspects are as follows:

1. Instrument performance: accuracy, repeatability, linearity, range, flow range, signal output characteristics, response time, pressure loss, etc;

2、 In terms of fluid characteristics: temperature, pressure, density, viscosity, chemical corrosion, abrasiveness, scaling, phase mixing, phase change, conductivity, sound velocity, thermal conductivity, specific heat capacity, isentropic index;

3、 In terms of installation conditions: pipeline layout direction, flow direction, length of straight pipe sections on the upstream and downstream sides of the detection component, pipeline diameter, maintenance space, power supply, grounding, auxiliary equipment (filters, dampers), installation, etc;

4、 In terms of environmental conditions: temperature, humidity, electromagnetic interference, safety, explosion prevention, pipeline vibration, etc; <

『SILVER Official Website SERVICE』