Clamp on meter | Types, models, and usage methods of multimeters | Thermal flow meter

『clamp on meter|thermal flow meter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

How to use a clamp multimeter?

1. The use of the clamp shaped 266CLAMPMETER multimeter for measuring current: Before measurement, the rubber insulation of the clamp shaped iron core should be checked for integrity.. The jaws should be clean, rust free, and have no obvious gaps when closed. When measuring, the magnitude of the measured current should be estimated first and an appropriate range should be selected. If it is impossible to estimate, you can first choose a larger range and then gradually reduce it to the appropriate gear. When shifting the range gear, it must be done without charging or with the jaws open to avoid damaging the instrument. Pull the wrench to open the jaws and place the predicted wire in the middle. When measuring, the measured wire should be placed in the middle of the jaws as much as possible. If there is any noise on the joint surface of the jaws, it should be opened and closed again. If there is still noise, the joint surface should be treated to ensure accurate reading. Additionally, it is not allowed to clamp two wires at the same time. When measuring currents below 5A, in order to obtain more accurate readings, if conditions permit, the wire can be wound a few more times and placed in the clamp for measurement. The actual current value should be the instrument reading divided by the number of wires placed in the clamp. Before and after each measurement, the switch for adjusting the current range should be set to the highest gear to avoid damaging the instrument due to measuring without selecting the range in the next use.

2. Clamp type 266CLAMPMETER multimeter The clamp type 266CLAMPMETER multimeter is a digital clamp type meter that measures a voltage range

2. What is the difference between meter and ammeter?

metron. meter, metrotre 1AHD: [m ^ "t... r] D.J. [6mi8t *] K.K. [6mit+] n. Chiefly British (noun) [mostly used in the UK] Variant of meter 1 meter 1metremetre 2AHD: [m ^" t... r] D.J. [6mi8t *] K.K. [6mit+] n. Chiefly British (noun) [mostly used in the UK] Variant of meter 2 meter 2metremetre 1AHD: [m ^ "t... r] D.J. [6mi8t] K.K. [6mit+] n. Chiefly British Variant of meter 1metremetre 2AHD: [m ^" t... r] D.J. [6mi8t *] K.K. [6mit+] n. Chiefly British Variant of meter 2metre (Middle English meter『SILVER Official Website SERVICE』